Go to content

Sulphur Springs

Completed 12 October 2022
Category
Flat Roof (C)
Tilt angle
10D
Location
Halethorpe, MD
Project size
2.69 MW

Limited roof deck load bearing capacity?

Opsun SunRail SR3 racking system is flexible in configuration and allows aligning the racking base rails right above the roof joists to apply the loads directly on the strongest parts of the roof, hence avoiding any stress on the roof deck which is often the limiting factor on the building.

Save on installation costs

Opsun SunRail SR3 solar racking for commercial flat roofs comes with 80% of its components already assembled on the base rails. This allows deploying the complete solar system 20% to 30% faster than traditional PV racking systems. This increases the projects profitability while allowing for faster delivery to your customers.

More profitable leveraging a fully optimized bifacial racking

Opsun racking is fully optimzed for bifacial PVs to allow generating a maximum of energy from the back side of the PV. This 10D tilt angle and elevated from the roof has no wind deflector which makes it fully optimized for bifacial. Systems like this one are expected to yield 8% to 12% more energy per PV from the bifacial boost when installed over a white roof membrane.

Search